Danby Designer DCR031B1WDD Manuel Du Propriétaire page 6

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the hinge cover and the upper hinge.
Remove the hinge hole covers from the top left
side of the cabinet. Remove the freezer door
from the cabinet.
2. Remove the central hinge from the middle of the
cabinet. Remove the refrigerator door from the
cabinet. Remove the screw hole covers from the
left side of the cabinet and install them in the
screw holes on the right side of the cabinet.
3. Remove the hinge hole covers from the top left
side of the freezer and refrigerator doors and
install them in the hinge holes on the top right
side of both doors.
4. Remove both adjustable feet. Remove the lower
hinge from the cabinet. The lower hinge must be
turned over before being reinstalled.
5. Install the lower hinge on the left side of the
cabinet. Install the refrigerator door and
central hinge. Before tightening the screws on
the central hinge, ensure than the top of the
refrigerator door is level with the cabinet and
that the rubber gasket is making a good seal.
Install both adjustable feet.
6. Install the freezer door. Install the upper hinge
on the top left side of the cabinet. Before
tightening the screws on the upper hinge, ensure
that the top of the freezer door is level with the
cabinet and that the rubber gasket is making a
good seal. Install the screw hole covers on the
top right side of the cabinet.
1
2
3
4
5
6
5