NewAge Products HOME BAR Serie Instructions D'installation page 4

Mounting the Worktop
Parts
7 8
Place worktop over cabinets and lower onto cabinets.
Needed.
4- #8 x25mm
screws
Drill 3/32" pilot holes on interior
9
roof of cabinet.
All manuals and user guides at all-guides.com
10 Tighten screws to secure cabinets.
3
3
Inserting Cabinets Shelves on an angle
Open cabinet doors. Attach
11
shelf clips to desired height.
Insert rack at a slight angle and position
13
4
over shelf supports. Rotate shelf so it is level.
Rest shelf on shelf supports
15
Make sure shelf supports are located
12
at the same height.
Lower shelf down
14
onto shelf supports.
16
Insert remaining shelves.