Télécharger Imprimer la page

GE JCP340 Manuel D'utilisation page 8

Publicité

Les langues disponibles

Les langues disponibles

Care and cleaning of the cooktop.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the cooktop.
Molded rib
Stem
Spring
clip
Clear groove
8
How to Remove Packaging Tape
To assure no damage is done to the finish
of the product, the safest way to remove
the adhesive left from packaging tape and
labels on new appliances is an application
of a household liquid dishwashing
detergent, mineral oil or cooking oil.
Control Knobs
The control knobs may be removed for easier
cleaning.
Before removing the knobs for
cleaning, please note that the knobs
are in the OFF position. When replacing
the knobs, check the OFF position to
insure proper placement.
Apply with a soft cloth and allow to soak.
Wipe dry and then apply an appliance
polish to thoroughly clean and protect
the surface.
NOTE: The adhesive must be removed from
all parts. It cannot be removed if it is baked on.
Wash knobs in soap and water but do not
soak. Avoid getting water down into the
knob stem holes.
The stem has a groove in each side. The
groove on one side has a spring clip. The
other groove is clear. Check the inside of
the knob and find the molded rib.
Replace the knob by fitting the molded
rib inside the knob into the clear groove
on the stem.

Publicité

loading

Ce manuel est également adapté pour:

Jcp350