Publicité
Les langues disponibles
Les langues disponibles
Fan Speed
1. Press FAN SPEED until you see the indicator light glow for
the desired setting.
2. Choose High, Med or Low.
■ High—for maximum cooling
■ Med—for normal cooling
■ Low—for minimum cooling
SPEED
Temperature
■ Press the TEMP/TIME up arrow button to raise the
temperature. Each time you press or hold the TEMP/TIME up
arrow button, the temperature will go up 1ºF until it reaches
86°F (30°C).
NOTE: After 5 seconds, the display will show the current room
temperature.
■ Press the TEMP/TIME down arrow button to lower the
temperature. Each time you press or hold the TEMP/TIME
down arrow button, the temperature will go down 1ºF until it
reaches 61°F (16°C).
NOTE: After 5 seconds, the display will show the current room
temperature.
Timer Delay
To set the Timer for a 1-hour to 24-hour delay until the air
conditioner turns off (the air conditioner must be On):
1.
Press TIMER. Timer OFF indicator light will flash. Display will
show remaining hours before the air conditioner will turn off.
TIMER
`
10
HIGH
MED
LOW
TEMP/TIME
ON
OFF
2.
Press the TEMP/TIME up or down arrow button to change the
delay time from 1 hour to 24 hours.
3.
After 5 seconds, Timer OFF indicator light will remain on.
Display will show the current room temperature.
To set the Timer to turn on the air conditioner, keeping
previous settings:
1.
Turn on the air conditioner.
2.
Press TIMER. Timer On indicator light will flash. Display will
show remaining hours before the air conditioner will turn on.
3.
Press the TEMP/TIME up or down arrow button to change the
delay time from 1 hour to 24 hours.
4.
Timer On indicator light will remain on.
To set the Timer to turn on the air conditioner, changing
the previous settings:
1. Turn on the air conditioner.
2. Adjust the mode to Fan, Cool, Energy Saver or Dehum.
3. For Fan, Cool or Energy Saver mode, adjust the fan speed to
High, Med or Low.
4. Adjust the temperature between 61ºF and 86ºF (16ºC and
30ºC).
NOTE: In Fan mode, the temperature cannot be set.
5. Press TIMER. Timer On indicator light will flash. Display will
show remaining hours before the air conditioner will turn on.
6. Press the TEMP/TIME up or down arrow button to change the
delay time from 1 hour to 24 hours.
7. Timer On indicator light will remain on.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
1. Press TEMP/TIME once after it has been programmed.
Display will show remaining time.
2. While the display is showing the remaining time, press TIMER
untill Timer indicator light turns off.
To see or change the remaining time (in hours):
Timer Off :
1.
Press TEMP/TIME once after it has been programmed.
Display on the air conditioner control panel will show
remaining time.
2.
While the display is showing the remaining time, press
the TEMP/TIME up or down arrow button to increase or
decrease the time.
3.
After 5 seconds, the display on the air conditioner control
panel will show the current room temperature.
Timer On :
1.
Display on the air conditioner control panel will show
remaining time.
2.
While the display is showing the remaining time, press the
TEMP/TIME up or down arrow button to increase or
decrease the time.
Publicité
