Page 1
All manuals and user guides at all-guides.com...
Page 2
All manuals and user guides at all-guides.com...
Page 3
All manuals and user guides at all-guides.com “IMPORTANTES INSTRUCCIONES DE SEGURIDAD” Cuando se usa una máquina de coser, debe seguirse unas precauciones básicas y que vienen incluidas a continuación. “Leer las instrucciones antes de usar” PELIGRO – Para reducir el riesgo de una descarga eléctrica. 1.
Page 4
All manuals and user guides at all-guides.com “IMPORTANTES CONSIGNES DE SECURITE” Lors de l’utilisation de la machine à coudre, il convient de toujours suivre les consignes de sécurité essentielles et de prendre notamment les précautions suivantes: “Lire toutes les instructions avant d’utiliser la machine.” DANGER –...
Page 5
All manuals and user guides at all-guides.com FOR USERS IN UK, EIRE, MALTA AND CYPRUS ONLY. If this machine is fitted with a 3 pin non-rewireable BS plug then please read the following. Always replace the fuse cover. Never use plugs with the fuse IMPORTANT (in the United Kingdom) cover omitted.
Page 6
All manuals and user guides at all-guides.com PLEASE READ BEFORE USING THIS MACHINE For safe operation 1. Be sure to keep your eye on the needle while sewing. Do not touch the handwheel, thread take-up, needle, or other moving parts. 2.
Page 7
All manuals and user guides at all-guides.com TABLE OF CONTENTS KNOWING YOUR SEWING MACHINE BUTTONHOLE AND BUTTON SEWING PRINCIPAL PARTS ............1 Making a Buttonhole ..........47 ACCESSORIES ............... 3 Odd-shaped buttons that do not fit into OPERATING YOUR SEWING MACHINE ....... 5 the button holder plate ..........
Page 8
All manuals and user guides at all-guides.com CONTENIDO CONOZCA SU MÁQUINA DE COSER OJALES Y COSTURA DE BOTONES ELEMENTOS PRINCIPALES ..........2 Para coser ojales ............ 48 ACCESORIOS ..............4 Botones con formas extrañas que no caben en el FUNCIONAMIENTO DE LA MÁQUINA DE COSER ..6 soporte del botón ..........
Page 9
All manuals and user guides at all-guides.com TABLE DES MATIÈRES COUTURE DE BOUTONNIERES ET DE BOUTONS CONNAITRE SA MACHINE A COUDRE Pour coudre une boutonnière ........48 PIÈCES PRINCIPALES ............2 Boutons aux formes irrégulières qui ne s'insèrent ACCESSOIRES ................ 4 pas dans la plaque à...
Page 10
All manuals and user guides at all-guides.com PRINCIPAL PARTS 1 BOBBIN WINDER (Page 21) Winds the thread onto the bobbin to be used for the lower thread. 2 STITCH LENGTH DIAL (Page 12, 16) Controls the length of the stitches. 3 SPOOL PIN AND SPOOL CAP (Page 21, 25) 4 STITCH WIDTH DIAL (Page 17) Controls the stitch width.
Page 11
All manuals and user guides at all-guides.com ELEMENTOS PRINCIPALES PIÈCES PRINCIPALES 1 DISPOSITIVO DE BOBINADO DE LA CANILLA (Página 22) 1 DEVIDOIR (Page 22) Hace bobina para la canilla que va a ser utilizada como hilo Sert à enrouler le fil sur la canette. inferior.
Page 12
Zigzag Presser Foot is on machine. NOTE (For U.S.A. only): Foot Controller: Model KD-1902 Part Code: XC7359-021 (110/120V Area) This foot controller can be used for Model PS-3700. 9 X59476-021 < 130920-021 Many of the above accessories are stored in the flat bed attach- ment.
Page 13
Code de référence: XC7359-021 (zone de 110/120V) Este pedal puede utilizarse para el modelo de máquina de coser La présente pédale peut servir pour le modèle de machine à coudre PS-3700. PS-3700. Muchos de los accesorios anteriores están almacenados en la mesa La plupart des accessoires susmentionnés sont rangés dans le plateau.
Page 14
All manuals and user guides at all-guides.com OPERATING YOUR SEWING MACHINE Connecting Plugs 1. Connect the power cord plug into the machine. 2. Connect the power supply plug into a wall outlet. CAUTION 1. When leaving the machine unattended, the main switch of the machine should be switched off or the plug must be removed from the socket-outlet.
Page 15
All manuals and user guides at all-guides.com FUNCIONAMIENTO DE LA FONCTIONNEMENT DE LA MÁQUINA DE COSER MACHINE A COUDRE Conexión de los enchufes Raccordement 1. Conecte la clavija del cordón de alimentación a la máquina. 1. Raccorder la fiche du cordon d’alimentation à la machine. 2.
Page 16
All manuals and user guides at all-guides.com Main Power/Sewing Light Switch This switch turns the main power/sewing light on or off. 1 Turn ON (toward the “I” mark) 2 Turn OFF (toward the “O” mark) Interruptor principal/luz de cosido Interrupteur principal/de la lampe Este interruptor permite apagar y encender la máquina y la luz.
Page 17
Doing so could cause a fire or an electric shock. NOTE (For U.S.A. only): Foot Controller: Model KD-1902 This foot controller can be used for Model PS-3700. Pedal Pédale Al presionar ligeramente el pedal, la máquina funcionará a baja Lorsque l’on appuie légèrement sur la pédale, la machine va fonctionner...
Page 18
All manuals and user guides at all-guides.com Checking the Needle The sewing needle must always be straight and sharp for smooth sewing. To Check the Needle Correctly: To check the needle, place the flat side of the needle on a flat surface.
Page 19
All manuals and user guides at all-guides.com Verificación de la aguja Vérification de l’aiguille La aguja de costura siempre debe estar bien recta y afilada para una L’aiguille doit toujours être droite et pointue pour piquer correctement. buena costura. Para comprobar la aguja: Pour contrôler correctement une aiguille : Para revisar la aguja, coloque la parte plana de la aguja sobre una Pour contrôler l’aiguille, placez le côté...
Page 20
All manuals and user guides at all-guides.com Changing the Presser Foot CAUTION • Always turn off the power before changing the presser foot. If the power is on and foot controller is stepped on, the machine will start and may cause injury. •...
Page 21
All manuals and user guides at all-guides.com VARIOUS CONTROLS Pattern Selection Dial 11 12 13 14 15 16 17 18 19 CAUTION When you use the Pattern Selection Dial to select a pattern, 20 21 22 23 24 25 26 27 28 turn the handwheel to the front (counter-clockwise) by hand to set the needle in the highest position before selecting the pattern.
Page 22
All manuals and user guides at all-guides.com Recommended Widths and Lengths for Stitches RECOMMENDED WIDTH RECOMMENDED INSTRUCTION PATTERN STITCH NAME SETTING (inch) LENGTH SETTING (inch) MANUAL PAGE 1-STEP AUTOMATIC F-1.5 BUTTONHOLE (1/8-3/16) (1/64-1/16) STRAIGHT STITCH 1-4.5 (Center position) (1/16-3/16) 0-6.5 F-4.5 ZIGZAG STITCH (0-1/4)
Page 23
All manuals and user guides at all-guides.com Anchos y largos recomendados para cada puntada ANCHO RECOMENDADO LARGO RECOMENDADO PÁGINA DEL PUNTADA NOMBRE (pulgadas) (pulgadas) MANUAL OJAL AUTOMÁTICO F-1,5 DE 1 PASO (1/8-3/16) (1/64-1/16) PUNTADA RECTA 1-4,5 (Posición centro) (1/16-3/16) 0-6,5 F-4,5 PUNTADA ZIGZAG (0-1/4)
Page 24
All manuals and user guides at all-guides.com Longueurs et largeurs recommandees pour chaque point REGLAGE DE LARGEUR REGLAGE DE LONGUEUR MODÈLE NOM DU POINT PAGE DU MANUEL RECOMMANDEE (pouce) RECOMMANDEE (pouce) BOUTONNIÈRE AUTOMATIQUE F-1,5 EN 1 PHASE (1/8-3/16) (1/64-1/16) POINT DROIT 1-4,5 (Position centrale) (1/16-3/16)
Page 25
All manuals and user guides at all-guides.com Stitch Length Dial Depending on your selected stitch, you may need to adjust the stitch length for best results. The numbers marked on the Stitch Length Dial represent the length of the stitch in millimeters (mm). THE HIGHER THE NUMBER, THE LONGER THE STITCH.
Page 26
All manuals and user guides at all-guides.com Stitch Width Dial Depending on the stitch selected, you may need to adjust the stitch width. The numbers marked on the dial represent the stitch width. THE HIGHER THE NUMBER, THE WIDER THE STITCH. 1 Stitch width dial CAUTION Do not adjust the stitch width while the needle is in the fabric.
Page 27
All manuals and user guides at all-guides.com Feed Dog Position Switch Use the Feed Dog Position Switch to raise or lower the feed dogs according to the job that is being done. When monogramming, embroidering, darning or sewing on buttons, the feed dogs should be lowered.
Page 28
All manuals and user guides at all-guides.com Wide table 1. Open up the legs at the bottom of the wide table. Pull out the four legs until they snap into place. 2. Pull the flat bed attachment off to the left. 3.
Page 29
All manuals and user guides at all-guides.com Tabla ancha Table large 1. Abra las patas situadas debajo de la tabla ancha. 1. Dépliez les pieds à l'arrière de la table large. Tire de las cuatro patas hacia fuera hasta que se acoplen en la Dépliez les quatre pieds jusqu'à...
Page 30
All manuals and user guides at all-guides.com THREADING THE MACHINE Winding the Bobbin CAUTION • If the thread spool and/or spool cap are set incorrectly, the thread may tangle on the spool pin. • Use the spool cap (large, medium, or small) that is closest in size to the thread spool.
Page 31
All manuals and user guides at all-guides.com ENHEBRADO DE LA ENFILAGE DE MÁQUINA LA MACHINE Bobinado de la canilla Remplissage de la canette PRECAUCIÓN ATTENTION • Si el carrete de hilo o la tapa del carrete no están colocados • Si la bobine et/ou le couvercle de bobine sont mal positionnés, correctamente, el hilo podría enredarse en el portacarrete.
Page 32
All manuals and user guides at all-guides.com Lower Threading CAUTION Setting the bobbin improperly may cause the thread ten- sion to loosen, breaking the needle and resulting in injury. 1 Wound evenly 2 Wound poorly CAUTION Be sure to turn off the power. If you accidentally press on the foot controller and the machine begins to operate, injury could result.
Page 33
All manuals and user guides at all-guides.com Enhebrado inferior Enfilage inférieur PRECAUCIÓN ATTENTION Si la bobina no está colocada correctamente, el hilo puede Si vous n’installez pas correctement la canette, il se peut que la perder tensión, romper la aguja y causar alguna lesión. tension du fil se relâche, que l’aiguille casse et que vous vous blessiez.
Page 34
All manuals and user guides at all-guides.com Upper Threading 1. Raise the presser foot using the Presser Foot Lever. (Fig. A) 2. Raise the needle to its highest position by turning the handwheel toward you (counterclockwise). (This step will raise the thread take-up into the correct position for threading.) 1 Presser foot lever 3.
Page 35
All manuals and user guides at all-guides.com Enhebrado superior Mise en place du fil supérieur 1. Levante el prensatelas con la palanca correspondiente. (Fig. A) 1. Remonter le pied-de-biche à l’aide du levier correspondant. (Fig. A) 2. Levante la aguja a su posición más alta girando la ruedecilla hacia 2.
Page 36
All manuals and user guides at all-guides.com Using Needle Threader Turn power switch to “O”. 1. Lower the presser foot lever. 2. Turn the handwheel toward you (counter-clockwise) to raise the needle to the highest position. CAUTION When using the needle threader, be sure the needle is in the highest position.
Page 37
All manuals and user guides at all-guides.com Uso del enhebrador Utilisation de l’enfileur Desenchufar la máquina, interruptor principale a “O”. Mettre l’interrupteur principal sur “O”. 1. Baje la palanca de la pata del prensatelas. 1. Abaisser le levier du pied-de-biche. 2.
Page 38
All manuals and user guides at all-guides.com Manually Drawing Up Lower Thread When sewing gathers or darts, the lower thread can be manually drawn up so that it will have some excess. 1. Pass the thread along the bobbin thread path in the direction of the arrow, and leave it there without cutting it.
Page 39
All manuals and user guides at all-guides.com Twin Needle Sewing Your machine is designed for twin needle sewing, which allows you to sew with two top threads. You can use the same color or two different colors of thread for making decorative stitches. Any of the patterns, except the buttonhole pattern, can be sewn with the twin needle.
Page 40
All manuals and user guides at all-guides.com PLACING THE EXTRA SPOOL PIN Place the vertical spool pin in the hole found on top of the machine near the horizontal spool pin. Place the second spool of thread onto the vertical spool pin as shown in fig. A. TWIN NEEDLE THREADING Each needle should be threaded separately.
Page 41
All manuals and user guides at all-guides.com Thread Tension Thread tension will affect the quality of your stitches. It may need to be adjusted when you change fabric or thread type. NOTE: It is recommended that a test sample be made on a fabric scrap before sewing on your project.
Page 42
All manuals and user guides at all-guides.com FABRIC/THREAD/NEEDLE COMBINATIONS Thread Fabric Size of needle Type Size Medium weight fabric Broadcloth Cotton 60 - 80 75/11 - 90/14 Taffeta Synthetic mercerized 60 - 80 Flannel, Silk or silk finished Gabardine Lightweight fabric Lawn, Batiste Cotton 65/9 - 75/11...
Page 43
All manuals and user guides at all-guides.com COMBINAISONS TISSU/FIL/AIGUILLE Tissu Taille de l’aiguille Type Taille Tissu moyen Drap fin Coton 60 - 80 75/11 - 90/14 Taffetas Mercerisé synthétique 60 - 80 Flanelle, Gabardine Soie ou finiton soie Tissu léger Linon, Batiste Coton Crêpe georgette...
Page 44
All manuals and user guides at all-guides.com Straight Stitching Pattern Stitch Length Stitch Width (Straight Stitch) 1-4.5 (Triple Stretch Stitch) STARTING SEWING 1. Raise the needle to its highest position and lift the presser foot lever before changing the stitch selection, stitch length or stitch width.
Page 45
All manuals and user guides at all-guides.com Puntadas rectas Point droit Modelo de puntada Largo de puntada Ancho de puntada Modèle de point Longueur de point Largeur de point (Puntada recta) 1-4,5 (Point droit) 1-4,5 (Triple puntada pespunto) (Point triple) PARA EMPEZAR A COSER POUR COMMENCER À...
Page 46
All manuals and user guides at all-guides.com Zigzag Stitching Pattern Stitch Length Stitch Width (Zigzag Stitch) F-4.5 0-6.5 ZIGZAG STITCH Select the Zigzag Stitch using the Pattern Selection Dial. Then, select the Stitch Length and the Stitch Width. It is recommended to sew using the Straight Stitch at the beginning and end of the Zigzag Stitches.
Page 47
All manuals and user guides at all-guides.com Blind Hem Stitching Pattern Stitch Length Stitch Width (Blind Hem Stitch) 3-6.5 (Stretch Blind Hem Stitch) F-1.5 The Blind Hem Stitch is used to finish the edge of a project like the hem of a pair of pants without the stitch showing. Use the Blind Hem Stitch for any non-stretch fabrics and the Stretch Blind Hem Stitch for stretch fabrics.
Page 48
All manuals and user guides at all-guides.com Shell Tuck Stitching Pattern Stitch Length Stitch Width (Shell Tuck Stitch) 3-6.5 The Shell Tuck Stitch can be used to sew a picot (lace like) edge on a lightweight fabric. 1. Set the Pattern Selection, stitch length and stitch width dials to sew a Shell Tuck Stitch.
Page 49
All manuals and user guides at all-guides.com Elastic Stitching Pattern Stitch Length Stitch Width (Elastic Stitch) F-2.5 3-6.5 The Elastic Stitch can be used for 3 functions: mending, sewing elastic or joining fabric. Each is explained below. Set the Pattern Selection, stitch length and stitch width dials to sew an Elastic Stitch.
Page 50
All manuals and user guides at all-guides.com Double Action Stitching Pattern Stitch Length Stitch Width (Double Action Stitch) (Bridging Stitch) 3-6.5 (Rampart Stitch) (Decorative Hem Stitch) 3-6.5 These stitches are used for joining two pieces of fabric, for example, when making patchwork. 1.
Page 51
All manuals and user guides at all-guides.com Scallop Stitching Pattern Stitch Length Stitch Width (Scallop Stitch) F-1.5 3-6.5 This machine automatically produces a Scallop Stitch which may be used as a decorative edging. 1. Set the Pattern Selection, stitch length and stitch width dials to sew a Scallop Stitch.
Page 52
All manuals and user guides at all-guides.com Decorative Stitching Pattern Stitch Length Stitch Width (Bead Stitch) (Arrowhead Stitch) 3-6.5 (Parallelogram Stitch) (Triangle Stitch) (Lighting Stitch) (Square Stitch) (Decorative Stitch) (Decorative Stitch) 3-6.5 (Decorative Stitch) These stitches can be used for making decorative top stitching and for smocking.
Page 53
All manuals and user guides at all-guides.com Patchwork Pattern Stitch Length Stitch Width (Fagoting Stitch) 3-6.5 (Link Stitch) These stitches are used to join two pieces of fabric while leaving a space between their edges. 1. Fold over the edges of the two pieces of fabric for the hem and baste the edges to a thin piece of paper leaving a small space between them.
Page 54
All manuals and user guides at all-guides.com Overedge Stitching Pattern Stitch Length Stitch Width (Elastic Shell Tuck Stitch) (Elastic Overlock Stitch)* 3-6.5 (Elastic Overlock Stitch) (Comb Stitch) These stitches are used to join together seams and finish them in one operation. The Elastic Overlock Stitches are useful when sewing stretch materials.
Page 55
All manuals and user guides at all-guides.com Feather Stitching Pattern Stitch Length Stitch Width (Feather Stitch) 3-6.5 Use the Feather Stitch as a decorative top stitch or when hemming blankets, tablecloths or draperies or when embroidering. 1. Set the Pattern Selection, stitch length and stitch width dials to sew a Feather Stitch.
Page 56
All manuals and user guides at all-guides.com Making a Buttonhole Pattern Stitch Length Stitch Width Foot F-1.5 Buttonhole Foot One-step buttonhole-making is a simple process that provides reliable results. 1. It is recommended to practice making a buttonhole on a scrap piece of fabric before attempting it on the actual garment.
Page 57
All manuals and user guides at all-guides.com Para coser ojales Pour coudre une boutonnière Modelo de Largo de Ancho de Modèle de Longueur de Largeur de Pied-de Prensatelas puntada puntada puntada point point point -biche Prensatelas Pied pour F-1,5 F-1,5 para ojales boutonnières La función de costura de ojales en una sola operación es un proceso...
Page 58
All manuals and user guides at all-guides.com Odd-shaped buttons that do not fit into the button holder plate Add the button diameter to its thickness, then set the buttonhole presser foot scale to this measurement. The distance in the scale between two lines of the same length is 0.5 cm (3/16").
Page 59
All manuals and user guides at all-guides.com SECURING THE STITCHING AND CUTTING THE BUTTON- HOLE 1. To secure the stitching, turn the material 90 degrees counterclockwise and sew Straight Stitches to the end of the front bar tack of the buttonhole. 2.
Page 60
All manuals and user guides at all-guides.com Buttonhole Fine Adjustment If the stitching on the two sides of the buttonhole do not appear uniform, the following adjustments can be made. 1. Set the Stitch Length Dial at “F-1.5” and stitch the right side of the buttonhole on a scrap of fabric while observing how the material is fed.
Page 61
All manuals and user guides at all-guides.com Ajuste fino de los ojales Equilibrage des boutonnières Si las puntadas en ambos lados del ojal no parecen ser uniformes, se Si les points de chaque côté de la boutonnière sont dissemblables, procéder pueden hacer los siguientes ajustes.
Page 62
All manuals and user guides at all-guides.com When the buttonhole is not sewn correctly: There are two different procedures for correcting buttonhole sewing, depending on which part of the buttonhole is not sewn correctly. Correction Procedure 1 (See fig. A) 1.
Page 63
All manuals and user guides at all-guides.com Button Sewing Pattern Stitch Length Stitch Width Foot Zigzag Presser (Zigzag Stitch) Less than 6.5 Foot 1. Measure the distance between the holes and set the appropriate stitch width using the Stitch Width Dial. For example, if the distance between the holes is 3 mm, set the stitch width to 3.
Page 64
All manuals and user guides at all-guides.com Zipper Insertion Pattern Stitch Length Stitch Width Foot (Straight Stitch) 3.5 (center) Zipper Foot The zipper foot is used to sew various types of zippers and can easily be positioned to the right or left side of the needle. When sewing the right side of the zipper, attach the shank to the left pin of the zipper foot.
Page 65
All manuals and user guides at all-guides.com Inserción de cremalleras Insertion de fermeture à glissière Modelo de Largo de Ancho de Modèle de Longueur de Largeur de Pied-de Prensatelas puntada puntada puntada point point point -biche (Puntada Pata de Pied pour fermeture (Point droit) recta) (centro)
Page 66
All manuals and user guides at all-guides.com Appliqués Pattern Stitch Length (Zigzag Stitch) An appliqué is created by cutting a contrasting piece of fabric into a shape to be used as a decoration on a garment or project. 1. Baste the cut design to the fabric in the location where desired. 2.
Page 67
All manuals and user guides at all-guides.com Using the Free-motion Quilting Foot Pattern Stitch Length Stitch Width Feed Dog (Straight Stitch) 3.5 (center) Down position The Free-motion Quilting Foot is useful for darning, monogramming and freemotion machine quilting. 1. Remove the power supply plug from the outlet. 2.
Page 68
All manuals and user guides at all-guides.com Utilización del prensatela libre Utilisation du pied quilting en mouvement libre Modelo de Largo de Ancho de Alimentadores puntada puntada puntada Modèle de Longueur Largeur de Griffe (Puntada recta) Cualquiera 3,5 (centro) Posición baja point de point point...
Page 69
All manuals and user guides at all-guides.com Monogramming, Embroidering and Quilting Pattern Stitch Length Stitch Width Foot Feed Dog Free-motion (Zigzag Stitch) Down Position quilting foot PREPARING FOR MONOGRAMMING, EMBROIDERING, AND QUILTING 1. Lower the feed dogs by setting the Feed Dog Position Switch to the Down Position as shown on page 18.
Page 70
All manuals and user guides at all-guides.com Monogramas, bordados y acolchado Monogrammes, broderies et quilting Modelo de Largo de Ancho de Modèle de Longueur de Largeur de Pied-de Griffe Prensatelas Alimentadores puntada puntada puntada point point point -biche d'entraînement (Puntada Cualquiera Prensatelas Pied quilting Cualquiera...
Page 71
All manuals and user guides at all-guides.com Darning Pattern Stitch Length Foot Feed Dog Free-motiom (Straight Stitch) Down Position quilting foot 1. Lower the feed dogs by setting the Feed Dog Position Switch to the Down Position as shown on page 18. 2.
Page 72
All manuals and user guides at all-guides.com Using the Walking Foot Pattern Stitch Length Stitch Width (Straight Stitch) 1-4.5 (Zigzag Stitch) 0-6.5 This foot is very useful for sewing materials such as vinyl cloth, synthetic leather, thin leather, etc. These materials are difficult to feed when sewing.
Page 73
All manuals and user guides at all-guides.com Utilización del pie caminante Utilisation du pied-de-biche mobile Modelo de puntada Largo de puntada Ancho de puntada Modèle de point Longueur de point Largeur de point (Puntada recta) (Point droit) 1-4,5 1-4,5 (Puntada zigazg) 0-6,5 (Point zigzag) 0-6,5...
Page 74
All manuals and user guides at all-guides.com Using the 1/4-Inch Quilting Foot Pattern Stitch Length Stitch Width (Straight Stitch) 2-2.5 3.5 (center) The 1/4-Inch Quilting Foot is used to sew fixed seam allowance 6.5 mm (1/4") when piecing together a quilt. (See fig. A) 1.
Page 75
All manuals and user guides at all-guides.com Utilización del prensatela para Utilisation d'un pied quilting 1/4" pespunte 1/4 Modèle de point Longueur de point Largeur de point (Point droit) 2-2,5 3,5 (au centre) Modelo de puntada Largo de puntada Ancho de puntada (Puntada recta) 2-2,5 3,5 (centro)
Page 76
All manuals and user guides at all-guides.com Using the Quilting Guide Use the quilting guide to sew parallel stitches that are equally spaced. 1. Insert the stem of the quilter into the hole at the rear of the walking foot or presser foot holder. 1 Walking foot 2 Presser foot holder 2.
Page 77
All manuals and user guides at all-guides.com Changing the Light Bulb CAUTION • Turn off the main power switch and unplug the machine before changing the light bulb. If the main power switch is on when the light bulb is changed, an electric shock may result.
Page 78
All manuals and user guides at all-guides.com Cleaning CAUTION Be sure to unplug the machine before cleaning it. Other- wise, electric shock or injury may result. 1. Remove the power supply plug from the outlet. 2. Raise the needle and the presser foot. 3.
Page 79
All manuals and user guides at all-guides.com Limpieza Nettoyage PRECAUCIÓN ATTENTION Asegúrese de desenchufar la máquina antes de limpiarla. De otra Veillez à débrancher le cordon d’alimentation de la machine avant manera, podría recibir una descarga eléctrica. de la nettoyer. Sinon, vous risquez de vous électrocuter ou de vous blesser.
Page 80
All manuals and user guides at all-guides.com Performance Check List Whenever sewing difficulties are encountered, review the section in this instruction manual that details the operation you are performing to make sure you are correctly using the machine. If the problem continues, the following check list may help you to improve the operation. If you still have difficulties, contact your nearest authorized service center.
Page 81
All manuals and user guides at all-guides.com FABRIC DOES NEEDLE MACHINE IS MACHINE DOES NOT FEED BREAKS NOISY OR SLOW NOT START PROPERLY Stitch Length Dial is Lint is clinging to the Needle is not Power supply plug is set at no feeding. bottom of the needle correctly inserted.
Page 82
All manuals and user guides at all-guides.com Listado de posibles incidencias Cada vez que encuentre dificultades al coser, vuelva a consultar la parte de este manual de instrucciones que detalla la operación que está realizando, para comprobar que usa correctamente la máquina. Si el problema persiste, el siguiente listado le puede ayudar a mejorar el funcionamiento.
Page 83
All manuals and user guides at all-guides.com LA MAQUINA ES LA AGUJA SE LA MAQUINA NO EL TEJIDO NO RUIDOSA O ROMPE ARRANCA ARRASTRA BIEN FUNCIONA MUY DESPACIO El selector de largo de puntada está puesto La aguja está mal Hay polvo en la Está...
Page 84
All manuals and user guides at all-guides.com Liste de vérification en cas de défaillances En cas de problème, consulter d’abord le chapitre voulu dans le présent manuel pour s’assurer de la bonne utilisation de la machine. Si le problème persiste, la liste de vérification suivante peut vous aider à...
Page 85
All manuals and user guides at all-guides.com L’ENTRAINE- LA MACHINE LA MACHINE MENT DU TISSU L’AIGUILLE EST BRUYANTE NE DEMARRE N’EST PAS CASSE OU LENTE CORRECT Le sélecteur de Des peluches sont La fiche d’alimenta- L’aiguille est mal longueur de point est accrochées sous la tion est retirée de la installée.
Page 86
All manuals and user guides at all-guides.com Repacking the Machine Keep the carton and packing materials for future use. It may become necessary to reship the machine. Improper packing or improper packing material could result in damage during shipping. Instructions for repacking the machine are illustrated. IMPORTANT This packing material is designed to prevent damage in transit.
Page 87
All manuals and user guides at all-guides.com Page Page 1/4-Inch Quilting Foot ..........3, 65 Needle Accessories ..............3 Inspection ............. 9 Appliqués ..............57 Replacement ............9 Arrowhead Stitch ............43 Needle Threader ............27 Bead Stitch ..............43 Overedge Stitching ............
Page 88
All manuals and user guides at all-guides.com Página Página Accesorios ..............4 Palanca de alimentadores ..........18 Acolchado ..............61 Palanca de ojales ............48 Aguja Palanca del prensatelas ..........2, 26 Cambio ............... 10 Pata de cremalleras ........... 4, 56 Verificación ............
Page 89
All manuals and user guides at all-guides.com Page Page Accessoires ................4 Patchwork (Assemblage) ............44 Aiguille Pedale du rheostat ..............8 Pour remplacer l’aiguille ..........10 Pédale ..................8 Vérification de l’aiguille ..........10 Pièces principales ..............2 Appliques ................57 Pied mobile ................
Page 90
All manuals and user guides at all-guides.com...