Page 9
5. Electrical Connection
Before proceeding further, verify that the power supply is disconnected. Verify
that the appropriate electrical supply requirements have been met. Please refer
to the table on page 4 for appropriate electrical requirements. The cooktop is
supplied with a 48-inch long conduit for a connection to an accessible junction
box. The conduit consists of three insulated wires. There are two hot lead
conductors (black and red insulated-tinned copper) and one insulated ground
conductor (green insulated-tinned copper).
Attach conductor wires to residence wiring in accordance with national, state and
local electric codes.
Warning –Grounding
The entire appliance must be grounded at all times
!
when the electrical power supply is on. Do not
ground the appliance with the neutral house supply
wire (white). A separate ground must be used.
6. Final Preparations Prior to Use
Remove the plastic film from the cooktop. Clean the cooktop before you use it
for the first time. A thorough cleaning with a recommended cooktop cleaner will
provide a clean, shiny coating on the cooktop surface.
The next sections of the manual cover cooktop use, maintenance and service
information.
Please keep these instructions with your cooktop for future reference.