RCA 25204 Guide De L'utilisateur page 14

Connections and Setup
NOTE: If you select the option AUTOMATIC, the LCD will be turned on during incoming call or when a
button is pressed. If you select the option ALWAYS ON, the LCD backlight will become always turned on.
7. Press sel/save to save. To start over, press EXIT to return to the LCD BACKLIGHT menu.
Ring Tone
Each line can have its own ring tone selection.
1. Press the mENU button.
2. Use the 5 or 6 button to scroll to SOUND SETTING.
3. Press sel/save button.
4. Use the 5 or 6 button to scroll to RING TONE.
5. Press sel/save button.
6. Press 3 or 4 to select l1 or l2 for ring tone change.
7. Then, use the 5 or 6 button to scroll the tone selection. There are 7 ring tones for
you to select from.
8. Press sel/save to save. To start over, press EXIT to return to the SOUND SETTING
submenu and repeat step 5.
Key Tone Volume
1. Press the mENU button.
2. Use the 5 or 6 button to scroll to SOUND SETTING.
3. Press sel/save button.
4. Use the 5 or 6 button to scroll to KEY TONE VOL.
5. Press sel/save button.
6. Use the 5 or 6 button to scroll to OFF, Low or High.
7. Press sel/save button to save. To start over, press EXIT to return to the KEY TONE VOL
menu.
14
All manuals and user guides at all-guides.com