temperature will be displayed. 30 seconds later,the controller display will be back to
the normal mode.
4. Timer on and off
A. Press
set timer on. When the indicator light is on and the time is twinkling,
press
again to set hour. Use
press
to set minute.
B. Use
or
will been seen.
30 seconds later, the controller display will be back to the normal mode.
C. Press
twinkling, press
stop, press
and water temperature will been seen. 30 seconds later, the controller display
will be back to the normal mode.
5. Cancel timer on and off
Press
press
when timer indicator light is off and LED shows water temperature, the
timer on and off is canceled. 30 seconds later, the controller display will be back to the
normal mode.
VII.Testing
1.Inspection before use
A.Check installation of the whole machine and the pipe connections according to the
pipe connecting drawing;
to adjust. After adjusting, press
to set timer off. When the indicator light is on and the time is
again to set hour. Use
to set minute. Use
or
to cancel timer on and off. When the number is twinkling,
or
to adjust. Before the twinkling stops,
or
or
to adjust. After adjusting, press
11
and water temperature
to adjust before twinkling