Publicité
Les langues disponibles
Les langues disponibles
Power on/off
CLOCK
TIME OFF
Light A
TIME ON
Light B
COOL
HEAT
MODE Key
MODE
Down-ALLOW Set required temperature and time
UP-ALLOW
LED screen
1. Operation Display
a.The display shows Time when the machine is off
b.The display shows Temperature of the swimming pool water when the machine is
on.
2. Water temperature setting
a. Press MODE key can switch HEAT-COOL circulating mode.
b. Available no matter the machine is on or off. Press HEAT or COOL light up.
c.Press the key
temp.
.Press
or
d. 5 seconds later, the controller display will back to the normal mode.
3. Time setting
A. Available no matter the machine is on or off.
B. Press
key to set time，when the clock on the screen is twinkling, press
again to set hour. Use
to set minute. Use
Set local time.
Set the time required machine auto-stop.
Shows the auto-stop time being set.
Set the time required machine auto-work.
Shows the auto-work time being set.
Shows the cool mode
Shows the heat mode
Heat or cool mode selection
Set required temperature and time
Display time, temperature and machine
or
to set water temperature. The controller indicates twinkling
to adjust to your desired water temp.
or
or
to adjust hour. Before the twinkling stops, press
to adjust. After adjusting， press
10
and water
Publicité
