Standard warranty terms and conditions
The warranty period is 2 years for private end
users in EU countries.
Products sold for commercial use, only have a
warranty period of 1 year.
The warranty covers material and/or fabrication
faults.
Restrictions and requirements
Normal wear and replacement of wearing parts
are NOT covered by the warranty.
Wearing parts, which are NOT covered for more
than 12 months:
•
Blades
•
Spools with nylon line (trimmerheads)
•
Cables
•
Switches
•
Membranes/gaskets
•
Spark plugs
•
Engine liquids (oil, gasoline, grease)
•
Starter cords
•
Filters
If you start the engine without adding correct fuel
mix of gasoline and 2-stroke oil, it will be
damaged and cannot be repaired and therefore
not covered by the warranty.
The warranty does NOT cover damages/faults
caused by:
•
Lack of service and maintenance
•
Structural changes
•
Exposure to unusual external conditions
•
Damages to the bodywork, deck, handles,
panels etc.
•
If the machine has been improperly used or
overloaded
•
Wrong use of oil, gasoline, grease or other
liquid types, which are not recommended in
this user manual
•
Bad or dirty gasoline, which results in
contamination of the fuel system
•
Use of unoriginal spare parts.
•
Other conditions where Texas cannot be held
responsible.
Whether a case is a warranty claim or not is
determined in each case by an authorized service
center.
Your receipt is your warranty note, why it should
always be kept safe.
REMEMBER: The purchase of spare parts as well
as any request for warranty repair, model number,
year and serial number should always be
informed. It can be found on the CE-label on the
machine!
* We reserve the right to change the conditions
and accept no liability for any misprints
16