Publicité
Install equipment in the enclosure
Warning! Do not add equipment to the enclosure until the enclosure is securely
attached to the wall.
Note: This enclosure comes with screws but the equipment you're installing may come
with it's own mounting hardware as well. Consult the documentation that came with
the equipment to determine which mounting hardware is best for this installation.
1. Decide where in the enclosure you want to install the equipment and line up the
mounting holes on the equipment with the holes in the vertical mounting rails or
horizontal mounting rails.
2. Insert the screws (or other mounting hardware) through the mounting holes on the
equipment and drive them into the mounting-rail holes with a screwdriver (or other
fastening tool).
Instruction manual
7
Publicité
