Publicité
Les langues disponibles
Les langues disponibles
2. DESCRIPTION
2.1 General
EasyPlus-functional
The EasyPlus is a powerful true sine wave inverter, a sophisticated battery charger that
features adaptive charge technology and a high-speed AC transfer switch in a single
compact enclosure. Beside these primary functions, however, the EasyPlus has several
advanced features that provide a range of new applications as outlined below.
Uninterrupted AC power
In the event of a grid failure, or shore or generator power being disconnected, the inverter
within the EasyPlus is automatically activated and takes over supply to the connected
loads. This happens so fast (less than 20 milliseconds) that computers and other
electronic equipment will continue to operate without disruption.
PowerControl – Dealing with limited generator or shore side power
With a Multi Control Panel a maximum generator or shore current can be set. The
EasyPlus will then take account of other AC loads and use whatever is extra for charging,
thus preventing the generator or shore supply from being overloaded.
PowerAssist – Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension allowing the
EasyPlus to supplement the capacity of the alternative source. Where peak power is so
often required only for a limited period, it is possible to reduce the size of generator needed or
conversely enable more to be achieved from the typically limited shore connection. When the
load reduces, the spare power is used to recharge the battery.
Programmable relay
The EasyPlus is equipped with a programmable relay that by default is set as an alarm relay.
The relay can be programmed for all kinds of other applications however, for example as a
starter relay for a generator.
3
Publicité
