Publicité
Les langues disponibles
Les langues disponibles
Assembly
The appliance can only be used if it is completely and correctly assembled in all its
parts, complete with handles, bar in a vertical position and locked.
Proceed as described and use the illustrations for reference.
Lift the bar (14) upwards to a vertical position, lower the handle (6) all the way down and
close the handle (5) completely to ensure it is locked. When finished, check that the bar is
firmly fixed to the body of the scooter.
Connect the two connectors (handlebar and
bar), if not previously inserted.
Position the handlebar on the bar all the way
down, so that the four holes line up.
Place the bag holder hook (13) on the bar (rear
part, a) and secure it with the two screws in a
suitable manner, using the Allen key provided.
Tighten the other two screws on the bar (front,
B) properly.
When
finished,
handlebar and bar are firmly secured
together.
make
sure
that
the
Publicité
