Bimar MP1000M Notice D'instructions page 37

Battery
Power supply
INSTALLATION
• After removing the packaging, make sure that the appliance is intact; in case of
doubt, do not use it and contact professionally qualified personnel. The packaging
(plastic bags, expanded polystyrene, nails, etc.) should not be left within the reach of
children as it is a potential source of danger.
• Before connecting the battery charger, check that the voltage values on the
nameplate correspond to those of the mains. If there is any incompatibility between
the socket and the appliance plug, have the socket replaced by a suitable one by a
professionally qualified person.