Bimar MP1000M Notice D'instructions page 34

- that the handles are correctly fixed onto the
handlebar
- that the long bar is correctly secured and locked
with the lever
- the handlebars and the steering are solid, and
there is no noticeable movement or noise.
- The lock/unlock lever is correctly closed. If not, the
handlebar stem could come off and cause you to
lose control of the scooter.
- the on/off switch is working properly
• Do not use the scooter when the kick stand is
lowered.
• The scooter, including various components and
materials, is subject to heavy stress and wear. If the
useful life of a component has been exceeded, it
may break suddenly, which may result in injury to
the user. Cracks, scratches and discolouration in
areas subject to heavy stress indicate that the
component has exceeded its useful life and should
be replaced.
A pad may also wear way due to the handlebar's
strong vibrations. In this instance, contact the
manufacturer as the pad must be replaced and/or
the handlebar must be checked and adjusted.
If the scooter is functioning normally, it should
operate safely and quietly. If you hear any noise or