SoFlow Flowboard Pop Manuel D'utilisation Original page 25

4.5 Normal faults and clearing methods
Symptoms
The Flowboard Pop
does not move after
start.
Riding speed is low.
The Flowboard Pop
do not work.
The motor will open
and close by itself.
Battery connection is not well.
Riding range is short
for one charge.
The battery can not
be charged or is
charged slowly.
The Flowboard Pop
can not be charged.
The charging port is damaged.
copyright by www.flowboard.ch
Possible Reasons
The brake is not fully reset,
which will cut off the power.
Battery is low.
Battery is low.
Battery life is over.
Controller is broken.
Battery life is over.
Voltage is not right.
Battery life is over
Charger can not output the
power.
Solutions
Reset the brake in position.
Charge the scooter.
Charge the scooter.
Change the battery.
Change the controller.
Adjust the connectors of
battery and controller.
Change the battery.
Maintain or change the
battery.
Change the battery.
Change the charger.
Change the charging port.
24
Fl