Samsung RZ32 Serie Manuel D'utilisation page 45

STEP 4 Reverse the bottom hinge
1
1
2
Untitled-1 45
4
6
5
1. Lay down the refrigerator with care.
Then, remove the screws from the
bottom hinge on the right side and
the levelling leg on the left side,
respectively.
2. Use an 8 mm socket wrench to remove
the rear bolt next to the shaft.
3. Remove the shaft bolt beneath the
bottom hinge.
4. Use a Phillips screwdriver to remove the
shaft.
5. Insert the shaft in the opposite side.
6. Reinsert and tighten the rear bolt.
7. Reinsert and tighten the shaft bolt.
8. Insert the bottom hinge in the opposite
side and tighten with screws. Mount the
levelling leg in the opposite side and
tighten with screws.
9. Stand the refrigerator with care.
English 45
2022-08-25 10:24:25