Publicité
Les langues disponibles
Les langues disponibles
7.Connect air supply hose to the male plug.
(See Figure 7)
8.Set the working pressure at 90psi/6.3bar for
best tool
performance.
NOTE: Working pressure refers to
the air line pressure set to tool when
tool is under working conditions.
OPERATION
1. Push the F/R lever (C) forward to "F" position.
Press the trigger (E). The tool chuck runs
clockwise for drilling on workpiece (See Figure 8)
2.Push the F/R lever (C) backward to "R"
position. Press the trigger (E). The tool chuck
runs counterclockwise for releasing drill bit out of
workpiece. (See Figure 9)
1/2" AIR DRILL
Publicité
