Danby DAC050ME1WDB Manuel Du Propriétaire page 10

INSTALLATION INSTRUCTIONS
INSTALLATION
1. Use 4 included 3/8" screws to fasten the top
mounting rail to the air conditioner.
2. Fasten the accordion style side panels to the
sides of the air conditioner. They are marked
"right" and "left". Pull the leading edge to
its maximum width and then slide the panels
downward into the grooved notches on the sides
of the cabinet.
3. Place the air conditioner into the window.
Close the window securely. The upper window
should slide into the top mounting rail. The
air conditioner should be tiled by 1/4" to the
outside to allow water to drain out the back of
the cabinet.
4. Fasten the air conditioner to the window frame
using the 3 included 1/2" screws. Fasten each
of the side panels using the included 3/4"
screws and the lock frames.
5. Attach the sash lock between the top of the
sliding window and the window frame using 1
of the included 3/4" screws. To prevent outside
air from entering the room, insert the foam top
window gasket cut to the size of the window.
9
1/4"