Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Drying Programmes Table
Programme selector
1.When the LED display screen brightens up, rotate the programme knob to select the
desired programme.
2.Select the【Delay】,【Time】,【Dry Level】,【Anti-Crease】or【Hygiene】
functions for additional options.
3.Press the【Start/Pause】button.
4.Press the【On/Off】button after the programme has comlpeted.
Programme start
The drum will rotate after the programme starts. The cycle phase LED in the display
will light up and the remaining programme time will be displayed.
Programme end
1.The drum will stop rotating after the programme ends. The display will show "0:00", also the
cycle phase LED showing "End" and related LED will illuminate. The dryer will start【Anti-
Crease】function if user doesn't remove the load. (Refer to page 16). Please press【On/
Off】button after unloading the tumble dryer to cut off power and pull out the plug.
2.Deal with the problems according to "Trouble Shooting" section, if there is an unexpected
stop during the drying procedure or the dryer shows an Error Code (Refer to page 25).
19
V.2
Publicité
