Viega MiniBloc Directives Du Produit

Product
Instructions
Viega MiniBloc
Vertical
Mount
Horizontal
Mount
Viega products are designed to be installed by licensed and trained plumbing and mechanical professionals who are familiar
with Viega products and their installation. Installation by non-professionals may void Viega LLC's warranty.
This document subject to updates. For the most current Viega technical literature please visit www.viega.us.
Viega LLC, 12303 Airport Way, Ste. 395 • Broomfield, CO 80021 • Ph: 800-976-9819 • Fax: 800-976-9817
PI-PF 520531 0518 MiniBloc Mounting Instructions (EN ES FR)
All manuals and user guides at all-guides.com
Mounting Instructions
®
3
Vertical
Mount
Horizontal
Mount
5
1
The MiniBloc shall be installed using the ManaBloc
installation instructions (included) and this instruction sheet.
1. For proper bracket spacing, measure distance between
the center ribs of the first and last MiniBloc module.
Mark this distance on the selected mounted surface.
2. Align the outside edge of each bracket within each
end mark. Mounting brackets shall be mounted level
and parallel to each other before affixing the MiniBloc
manifold. NOTE: Use both mounting brackets provided
with each MiniBloc manifold. Ensure the mounting
2
surface is suitable to support the weight of the
manifold and attached tubing when filled with water.
3. Use two wood screws per bracket, 1" or longer, to
prevent misalignment.
4. Position bottom metal tie-rod into the bottom clip of
the mounting brackets then roll manifold toward top
clip. The MiniBloc may be mounted either vertically or
horizontally.
5. Complete mounting by firmly pushing the MiniBloc
toward the top clip of the mounting brackets which
4
should spread and snap over top metal tie-rod.
®
1 of 2