Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
ENERGY-SAVING TIPS
Install the fridge or freezer in a cool place out of
direct sunlight and away from cookers, heaters,
dishwashers or any hot air emitting items.
Do not set the freezer temperatures lower than
necessary. Set the internal temperature within
the correct range e.g. adjust the thermostat at
middle position -18°C in the freezer respectively.
Let pre-cooked foods cool down before placing
them in the fridge or freezer. This will prevent
the internal temperature of the fridge from rising.
Keep your freezer full, but not over crowded, Try
to leave about 20% free space for air circulation.
To prevent cold air escaping, limit the frequency
of opening door. When retuning from shopping,
sort foods to be kept in your freezer before
opening the door. Only open the door to put
food in or take it out.
Make sure the door seal is clean and in good
condition. Defrost regularly or when ice is more
than 5mm thick. Thick ice covering the inner
sides significantly increases energy use.
GB-14
REVERSE DOOR
This freezer can be opened either from the left
or right side. The default way of opening the
door is from the right side. If you want to open
the door from the left side, please follow the
instructions below. Tools Required: Phillips style
screwdriver / Flat blated screwdriver / Hexagonal
spanner.
• If you want to have the door swing reversed,
we recommend that you contact a qualified
technician. You should only try to reverse
the door yourself if you believe that you are
qualified to do so.
• Ensure the unit is unplugged and empty.
• Adjust the two levelling feet to their highest
position.
• To take the door off it is necessary to tilt the
unit backwards. You should rest the unit on
something solid so that it will not slip during
the door reversing process.
• All parts removed must be saved to do the
reinstallation of the door.
• The refrigerator inclination angle should be
less than 45°.
ENGLISH
GB-15
Publicité
