Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
USE
• This appliance is designed to operate in
ambient temperature between 10°C and 38°C.
If these temperatures are exceeded, i.e. colder
or warmer, the appliance will not operate
correctly. If the ambient temperatures are
exceeded for long periods, the temperature in
the freezer section will rise above -18°C and
food spoilage may occur.
• Remove all packaging materials from the
appliance. Wash the inside of the cabinet with
lukewarm water and bicarbonate of soda (5
ml to 0.5 liter of water). Dry the appliance
thoroughly.
• When you use the freezer for the first time
or after defrosting, set the thermostat control
to the maximum position for at least 2
hours before introducing food to be stored,
and then readjust to the normal position.
• If there is a power failure, do not open the
door. Frozen food should not be affected
if the failure lasts for less than 12 hours. If
the failure is longer, then the food should
be checked and either eaten immediately or
cooked and then re-frozen.
GB-10
SETTING THE THERMOSTAT KNOB
The temperature of the freezer is controlled
with a thermostat knob from MIN (less cold)
MID (intermediary) and MAX (coldest)
Changes of the ambient temperature affect
temperature in the interior of the appliance so
choose a correct setting of the temperature control
knob, depending on your ambient conditions.
Set the thermostat knob to MID position to
achieve -18°C in the freezer compartment.
Please Note:
If the appliance is switched off you must wait at
least 5 minutes before restarting the appliance
or re-inserting the plug into the wall outlet.
This is to allow the protection device in the
compressor to reset.
If the compressor fails to start correctly remove the
plug and wait for 5 minutes before you try again
then the compressor should restart normally.
The storage temperature may be affected by:
• The room temperature
• How often the door is opened
• How much food is stored
• Position of the appliance
ENGLISH
GB-11
Publicité
