Poly Savi 8210 Office Manuel D'utilisation page 6

Hook up system
Desk phone setup
details
Using the diagram, connect your headset system.
NOTE Base configuration settings
Desk phone
Most phones
Cisco phones
Cisco phones with EHS cable
Choose a desk phone setup A, B, C or D and connect cables.
A Desk phone with dedicated headset port
• Connect one end of the telephone interface cable to the back of the base
• Connect the other end of the telephone interface cable into the dedicated headset
port on the desk phone
IMPORTANT
Cisco phones use configuration D on the bottom of the base. Most other
phones use default configuration A.
REMARQUE
Use this setup if you are not using the HL10 lifter or EHS cable. In this
configuration, press both the headset button on your desk phone and the call control
button on the headset to answer or end calls.
B Desk phone (standard)
HEADSET PORT
OR
NO HEADSET PORT
Setting (on base's side panel)
A
D
A
USE
6