Publicité
Les langues disponibles
Les langues disponibles
To convert to LP gas, the LP Gas Conversion Kit Part Number
W10118099 must be used. Follow instructions included with kit.
A
A. Side burner gas pipe
B. New CSA International approved
"outdoor" flexible gas supply line
C. Rear of side burner
D. To local gas supply
LP Gas Conversion Using a 20 lb LP Gas Fuel Tank
To convert to LP gas, the LP Gas Conversion Kit Part Number
W10118099 must be used. Follow instructions included with kit.
A 20 lb LP gas fuel tank must be purchased separately.
INSTALLATION
INSTRUCTIONS
Built-in Outdoor Side Burner Installation
WARNING
Excessive Weight Hazard
Use two or more people to move and install side
burner.
Failure to do so can result in back or other injury.
Unpack side burner. Remove all packaging materials and
remove side burner from carton.
Place side burner into outdoor enclosure, but leave enough
room in back to connect to gas supply and electrical single
prong plug-in.
B
C
D
Install Tank Tray for 20 lb LP Gas Fuel Tank
For Models Equipped for Use with a 20 lb LP Tank
1. Position the tank tray for 20 lb LP gas fuel tank in the island
cabinet.
centerline of
tank tray
20⁵⁄₈"
(52.4 cm)
Dimension A
Front to back burner
8³⁄₃₂" (20.6 cm)
Side by side burner
12⁹⁄₁₆" (31.9 cm)
2. Square the tank tray mounting brackets and mark the
mounting hole locations in the island base.
3. Remove the top nuts (4) from the tank tray assembly and lift
the tank tray off of the mounting brackets.
A. Top nut
B. Tank tray
C. Bottom nut
D. Bolt
E. Mounting bracket
2¹⁄₄"
(5.7 cm)
A
18³⁄₈"
B
(46.7 cm)
Dimension B
16³⁄₁₆" (41.1 cm)
25¹⁄₈" (63.8 cm)
A
B
C
D
E
13
Publicité
