Haier HLE172 Mode D'emploi page 18

1.Butter, cheeses etc.
2.Food in jars and bottles
3.Drinks, e.g. milk
4.Cooked food
5.Yogurts, preserves etc.
6.75cl bottles or ready meals etc.
7.Fresh meat and fish
8.Fruit and vegetables
The fridge shelves can be moved according to the storage
requirements within the fridge section. To move the shelf, lift up
the rear section and then pull it outwards. To replace, slide the
shelf back into the slot, and then lower the rear section.
The wine racks can be deployed or withdrawn as desired.
The most energy-saving configuration requires drawers, food
box and shelves to be positioned in the product, please refer to
the above pictures
Control panel
The above image is the control panel, and only the buttons on left and right are functional to
control the refrigerator. The right button is to switch on/off the refrigerator, while the left
button is to adjust the temperature.
A. Refrigerator temperature adjustment sensor
This button is used to adjust the temperature within the fridge. Press this sensor to make
adjustment, and then as many times as necessary until the desired level is selected. The
settings range from super cooling, 2°C, 3°C, 4°C, 6°C, 8°C.
Start super cooling: when super cooling selected, it means refrigerator will work at 2°C for 24
hours, after that, the function will quit automatically, then back to the original temperature
setting.
Please note: Where possible, avoid having the temperature setting on super cooling or 2°C all
of the time. This will help to alleviate strain on the compressor and refrigeration system.
B. Refrigerator temperature setting display
This display will illuminate the current temperature setting. Adjusting the temperature will
cycle through this display.
Please note: You do not use numbers to change the temperature. Instead, use the
refrigerator temperature adjustment button (A).
16