CONTINENTAL EDISON CEBDSCSF19B2 Mode D'emploi page 47

Bluetooth Pairing:
1. Press the Bluetooth button on the Remote control to enter the Bluetooth mode.
You can also short press the Source button on the Soundbar to choose the
Bluetooth Source.
2. The indicator light will slowly be flashing in blue.
3. Press the Pair button on the side of the unit. The pairing indicator will flash
quickly.
4. Turn on the Bluetooth function on your devices and the device will start to search
for the Soundbar.
5. Select "CEBDSCSF19B2" from the list of found devices.
6. If asked, enter the password "0000" and press OK.
7. When successfully paired with your device, the indicator light will be lit steadily.
Note: The Bluetooth playback is controlled by your device and the buttons on the
remote control.
Note: The operation range for the Bluetooth connection is 10 meters.
Note: If a mobile phone on which you are playing music receives a call, the music
will be interrupted and not played. After call end, the devices are connected to
each other again and playback continues.
8. Press and hold the Bluetooth button on the Remote Control for 3 seconds to
disconnect the Bluetooth pairing.
9. To add a new device to the Bluetooth it is necessary imperatively to press
the Bluetooth button of the remote control or the product or the sound will not
be detected. Needless to do this if the product has already been connected to
the bar of its
AUX Source:
1. Ensure that the soundbar is connected to the TV or other audio device via an
AUX cable.
2. Press the AUX button on the Remote control to enter the mode. You can also
short press the source button on the soundbar to choose the AUX source.
Note: The playback is controlled by your device and by the button on the remote
control.
EN-19