Operation - CONTINENTAL EDISON CEBDSCSF19B2 Mode D'emploi

Install the Remote Control:
The Remote Control has a pre-installed lithium CR2025 battery. Remove the
protective tab to activate the Remote Control battery.
Note: The Remote Control works within a range of 6 meter.
Remote Batteries
Remote control: requires 1 CR2025 button cell type battery (included).
Get Started:
1. Make sure you have made all the necessary cable connections before
connecting the Soundbar to a wall outlet, the soundbar will enter to standby
mode, the indicator will light up in red.
2. Make sure the subwoofer is connected to the power, and turn the button to "ON"
3. Short press
soundbar. The Bluetooth indicator will light up.
4. Press the source button on unit or Remote Control to choose various source.
Note: The Soundbar will re-enter the Standby Mode again if there is no operation
for 15 minutes.
IV. OPERATION
/SOURCE on unit or on remote control to turn on the
EN-18