Mutsy NEXO Mode D'emploi page 26

All manuals and user guides at all-guides.com
Place the Safe2go car seat
· Orientate the Safe2go car seat such that it is directed rearwards on the
frame. Hold the Safe2go car seat with the central hinge points of the
support bar directly above the adapters.
· Lower the Safe2go car seat and press solidly into the adapters until you
hear a click. Check that the Safe2go car seat has been placed horizon-
tally and has been attached properly by trying to lift it from the frame.
Remove the Safe2go car seat
· Press the buttons on both adapters to unlock the Safe2go car seat.
· Lift the Safe2go car seat straight up from the frame.
Remove the Safe2go adapters (x)
· Press the release button (x1) on the adapter. Turn the top of the adapter
outwards (x2) and take the adapter out of the cam from the top. (x3)
Maxi-Cosi car seat
· The Maxi-Cosi car seat adapters are suitable for use with the following
Maxi-Cosi group 0+ car seats: Maxi-Cosi Pebbles, Maxi-Cosi Cabriofix,
Maxi-Cosi Citi.
· Always observe the instructions in the manual of your Maxi-Cosi car
seat before you start using the car seat.
· Make sure that the frame has fully been unfolded and the brake blocked
during all actions indicated below.
Place the Maxi-Cosi adapters on the frame (y)
· The adapter marked with 'R' is placed on the right side of the frame, the
adapter e adapter marked 'L' is placed on the left side.
· Remove the bumper bar and the hood.
· There is an opening at the front of the adapter. Put the opening of the
adapter around the cam (y1) on the frame from the outside.
· Turn the top of the adapter inwards (y2) until it clicks. Check that the
adapter has been attached properly by trying to lift it from the frame.
Place the Maxi-Cosi car seat on the adapters
· Orientate the Maxi-Cosi car seat such that it is directed rearwards on
the frame.
· Hold the Maxi-Cosi car seat with the central hinge points of the support
bar directly above the adapters.
· Lower the Maxi-Cosi car seat and press solidly into the adapters until you
hear a click. Check that the Maxi-Cosi car seat has been placed horizon-
tally and has been attached properly by trying to lift it from the frame.
EN
21