Motor Top With Alarm And Shock Valve - Bona DCS25 Manuel D'utilisation

EN
Description of the Main Parts
DCS25 Manual
The powerful suction motor of BONA DCS25 is placed in the motor top.
The filter block the fine and smallest dust particles, which have not been held back by the
membrane filter. The filter holds back the particles larger than 0.3m (0.0003 mm). Filter
surface: 1.1 m².
To get to the HEPA filter, the pre-filter / membrane filter must be removed.

Motor Top with Alarm and Shock Valve

The motor top is equipped with a shock valve for cleaning the pre-filter, and an acoustic
alarm, which will beep when the air flow is too low (<20 m/sec).
Electrical hand tools can be connected directly to the BONA DCS25.
(MAX 2000 W)
11