Motor Performances; Electrical Parts - Features - Starting Up - Bona Flexi Vacuum Instructions Originales

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

- These warnings are the minimum safety requirement that has to be adopted. Please take note of the safety regulations in your work
place.
- For disposal, the procedure prescribed by local laws must be followed.

MOTOR PERFORMANCES

Power rating
800 W
Max vacuum
245,17 hPa
Max airflow
171 m³/h
WARNING: It is forbidden tampering the appliance. Failure to comply with these instruction could cause serious
accidents and damages to the user, that can also lead to death.
The manufacturer declines all responsibility for damages or injuries due to improper use of the machine or
caused by the failure to respect the instructions given in this manual.

ELECTRICAL PARTS - FEATURES - STARTING UP

A1
General switch.
Position "0" appliance off - Position "I" appliance on.
A2
Additional socket to connect the power tool (1300W max).
WARNING: The additional socket is always under power when the machine is connected to electrical main.
WARNING: When using power-tools, do not exceed the power reported on the additional socket. Check that the
power-tool voltage corresponds to what is stated on the technical data plate on the vacuum cleaner. Failure
to comply with these instruction could cause serious accidents and damages to the user, that can also lead to
death. Connect the plug to a receptacle that is connected to the electrical ground.
WARNING: Before connecting the power tool, make sure that it is off.
WARNING: Before turning off the appliance, make sure that the power tool is off.
At the end of a cleaning session turn off the vacuum and remove the plug from the socket.
A3
Light indicator connected to a pressure switch, it turns on when the filter cartridge is clogged and it must be replaced.
Bona Flexi Vacuum - English
15

Publicité

Table des Matières
loading

Table des Matières