General Description - Bona DCS25 Manuel D'utilisation

General Description

BONA DCS25 is an industrial vacuum cleaner developed for
the collection of very fine and health hazardous dust. BONA
DCS25 meets the requirements for vacuum cleaners within the
industry and the construction industry today.
The user manual is to ensure a secure operation of the
vacuum cleaner, and to secure that the user is in no way
uncertain as to the use. The manual must be stored near the
vacuum cleaner. Does any uncertainty arise as to the use of
the vacuum cleaner or the material collected, the work should
be stopped until all questions have been cleared.
Before using the machine, please read this manual.
This user manual must be kept available for the operator at all times.
• Teflon-coated pre-filter (BIA dust class "M")
• Filter cleaning during operation with back flush valve
• HEPA-filter (BIA/IFA dust class "H"
• Protection level IPX4 (IEC 60 529)
• Satisfies the demands of EN 60 335-2-69 Annex AA, for collection of
health hazardous dust in dust class "H"se H
• Electrical outlet with automatic start/stop
• Beeper alarm in case of too low air flow
• Soft start of motor
• Post-suction when using automatic
The machine is ideal for the collection of fine and health
hazardous dust, such as wood dust or dust from grinding/
sanding machines. The machine is also ideal for use in
connection with hand tools.
Pictures and drawings are for illustrative purpose and will make
the understanding of the manual easier. The pictures shown
may therefore be different from the actual.
EN
DCS25 Manual
3