Publicité
Les langues disponibles
Les langues disponibles
Install in the PC the software for data adquisición, RS232 Uploader. The software is include in the
CD.
Turn off power and then connect the accessory cable between the COM port of PC and torque
wrench.
-
Make sure the connection between PC and wrench is normal.
-
Change the wrench operation mode to "Send". (Please refer to "Peak Hold Mode Recorded
Value Review" section)
- Use the PC to start the data communication program (open application as administrator).
-
In uploader program, first select the correct COM port No.
-
Next, select the file path to save the uploaded data.
-
Finally, press "upload" button to transmit the torque records to PC.
-
The uploaded data is then shown on the column and saved in the *.csv file. Use Microsoft
Excel to view *.csv file.
CAUTIONS: Refer to the uploader program user guide for the detail operations.
CONNECTING COMMUNICATION CABLE
UPLOADING RECORD DATA
31
Publicité
