PNI ESCORT HP 9500 Manuel Utilisateur page 8

ASQ
Briefly press the ASQ button on the microphone to activate the ASQ function.
The ASQ symbol will light on the screen. Press and hold the ASQ key on the
microphone again to select the level. 5 levels are available (01-05).
9,19/SCAN
Briefly press the button 9,19/SCAN. The PTY symbol will flash on the screen.
Channel number 09 will appear on the screen. Briefly press the 9,19 button again
to switch to channel 19. Press the 9,19 button again briefly to return to normal
operating mode. PTY will disappear from the screen.
Long press the 9,19/SCAN button to activate the SCAN function. The SC symbol
will light on the screen. Use the CH+ or CH- buttons on the radio or the ▲ and
▼ buttons on the microphone to decide the channel scan direction.
Note: If the RX symbol is lit on the screen, meaning the radio is on the reception,
the SCAN function will not work. Turn the Squelch knob slightly to the right. The
RX symbol will disappear from the screen. Reactivate the SCAN function by long
pressing the 9,19/SCAN button.
MODE/BAND
Briefly press the MODE/BAND button to switch between AM and FM mode. If
you are in the UK band, briefly press this button to quickly switch to the CE band
and vice versa, from the CE band to the UK band.
Changing the standard
Long press the MODE/BAND button to change the frequency band
corresponding to your country. Use the CH+ or CH- buttons to find the desired
band, then press the PTT key or restart the radio to confirm and save.
User manual 8