Special Warnings; Other Warnings; User Manual - PNI ESCORT HP 9500 Manuel Utilisateur

SPECIAL WARNINGS

Please read the following precautions to prevent fire, personal injury or the
product's destruction.
Do not attempt to set the radio while driving; it might be dangerous.
This product is designed for 12V or 24V DC power supply.
Do not place the radio on an excessively dusty, damp or unstable surface.
Do not connect the antenna during transmission, risk electric shock.
Please keep the distance from devices that cause interference (such as TV,
generator, etc.)
People who use pacemakers are advised to keep distance from the antenna
during transmission and especially not to touch it.
Do not approach metal objects to the internal electrical side pf the radio;
danger of electric shock.
Avoid exposing the radio to temperatures below -26°C and above +60°C. The
temperature inside a vehicle may sometimes exceed +80°C, which can cause
irreparable damages to electric devices. Do not expose the radio to direct sunlight.
Do not place anything on the radio, it will prevent it from cooling down.
Check if you have the vehicles battery charged enough to avoid its quick
discharge.
It is important to turn the radio off before starting the engine, to avoid damages
caused by high starting voltage.
You must use a 2A 250V type F fuse. No not use a fuse with higher value.
If an abnormal smell or smoke is detected as coming from the radio, switch off
the appliance immediately.
Do not transmit for a long time, the radio may warm up.
Keep the radio away from children.

OTHER WARNINGS:

Before you connect or use this product, please read these operating instructions
carefully. Keep this user manual for future use.
Before using the radio, please connect the antenna. Check the SWR before
transmitting. A too high SWR can lead to the destruction of the internal
components of the radio, which are not covered by the guarantee.
None of the inner components of the radio can be repaired by the user. In case of
damage, contact an authorized centre.
To prevent the risk of fire, use only the recommended power supply.
3

User manual