Costway FP10218US Manuel De L'utilisateur page 21

Troubleshooting
Review the following pages before calling for service.
Problem
Program does
not work
Drum does
not turn
Hot air is not
blowing out
The laundry
is not
thoroughly
dried
Dryer does
not start
LED display
"E1" Possible
Cause
Possible Cause
● Is the power cord inserted
firmly?
● Is the door closed?
● Is the power cord
inserted?
● Does the receptacle have
power?
● Is the Program in correctly
set on cold air?
● Are the front and back
filters clogged?
● Is there too much laundry
in the dryer?
● Have items been added
whilst the dryer is in
operation?
● Has the laundry become
twisted whilst drying?
● Has the dryer been placed
in a small and badly
ventilated area?
● Is there a power failure?
● Is the power cord inserted
firmly?
● Is the door closed?
● Is the Program in the OFF
position?
● Is the door closed?
21
What to do
● Insert the power
cord firmly
● Close the door.
● Insert the power
cord firmly.
● Check the power
cord receptacle.
● Set the Program
correctly
● Clean the filter.
● Reduce the amount
in the dryer.
● Re-dry the items
again.
● Untwist the items
and readry.
● Place the dryer in a
well-vented area.
● Try again when
there is power
● Insert the power
cord firmly
● Close the door
● Set the dry program
● It is normal, just
please close the door
and disappear