Costway FP10218US Manuel De L'utilisateur page 19

3. Re-installing the filter
After cleaning, assemble in the sequence of "exhaust filter - lint
filter- exhaust vent shroud", align the recesses in the center with
the projection in the center of the drum. Make sure that it is firmly
inserted (as shown in figure 3).
Note: The filter fixed in the bottom of the drum should also be
cleaned with a soft brush.
Cleaning of the Air Intake Filter
The filter should be cleaned once a month.
Remove by pulling outwards holding the upper and lower ends of
the air intake shroud. Remove the filter inside the shroud and clean
it with a soft brush. Reassemble and install as before.
Slightly push upwards with your thumb until the latch hook
disconnects, then remove.
Air Intake Filter
19
Figure 3