Dockin D WAVE Mode D'emploi page 7

TURNING OFF
Press the "On / Standby" button to switch off the D WAVE spea-
ker. For transportation or during long periods of non-usage you can
completely turn it off by using the power switch on the back.
CHARGING
Charge your D WAVE by using the provided power cable. The char-
ging input is on the back of the device.
The charging status is displayed by the four white charging LEDs on
the top panel. They show the battery charge in 25% steps.
USB CHARGING OUT
The USB connector on the back can be used to charge USB powe-
red devices, but only when the speaker is connected to the mains
power.
POWER SAVING FUNCTION
If there hasn't been any signal transmission or charging via the USB
output for 15 minutes, your D WAVE turns off automatically. If the
AUX cable is connected the power saving function is disabled, which
allows stationary use.
PACKAGE CONTENT
• D WAVE speaker
• Charging cable
• AUX cable
• Manual