Dockin D WAVE Mode D'emploi page 6

TURNING ON
Press the power switch on the back of the D WAVE and then press
the "On / Standby" button on top to turn the device on.
PAIRING / CONNECTING
Bluetooth:
The D WAVE will automatically connect with the last Bluetooth de-
vice (when in BT mode) or changes into pairing mode (BT LED is
blinking).
Connecting:
• Turn on the D WAVE speaker and select the BT mode via the
"Source" button.
• Activate Bluetooth on your device (Bluetooth settings).
• Go to your Bluetooth settings and scan for discoverable de-
vices.
• Select "DOCKIN D WAVE" from the Bluetooth device list.
• After successful pairing the BT LED on the D WAVE stays lit and
you can play music.
AUX / RCA / Optical:
• Connect the sound source via the appropriate cable to the
back of the D WAVE speaker.
• Turn on the D WAVE speaker and select the desired mode via
the "Source" button.
• Start the music on your playback device.