PSI Woodworking Products PKGRIND13X Manuel D'instructions

#PKGRIND13X
Vintage Salt & Pepper Mill
Kit Features:
• Classy retro vintage/steampunk styling
• Includes adjustable Ceramic Grinder suitable for grind-
ing either salt or pepper
• New easy mount™ grinder capsule assembly
• Cast metal component with salt safe plastic liner
• Make a Salt/Pepper grinder set
• 6-1/2" overall height
Required Accessories:
• 1" Forstner Bit, item #FB1
• 1½" Forstner Bit, item #FB150
• 1" Jam Chuck, item #CJAM1
• Grinder positioning jig (see Diagram C)
• Epoxy Glue
• 3 Jaw Drill Chuck
• Wood required: 2-1/4" or larger sq x 3-3/4" (Finished size)
PARTS - LIST
Handle
Opening
Mounting
Screws (2)
Preparing the Blank
• Cut a square 90-degree blank to size
• Mark the center of both ends to size
• Drill a 1" hole, 1" deep into one end
• Drill a 1½" hole at the opposite end to meet
Cap Nut
Shaft
Grinder
Body
Grinder Capsule Assembly*
*Capsule assembly includes spring, Grinder stone,
Grinder housing and Mounting components -
Glues into mill housing
Drilling The Blank
1"
1"
PSI Woodworking Products
DIA - A
1-1/2"
3-3/4"
2-1/4"
Or larger