Costway FP10248US Mode D'emploi page 5

● Shortly press and "°F" will flash. Press
°F, °C, MAX, ECO, H, M, and L will flash in turn repeatedly to
access the setting state of temperature unit and compressor speed.
After the flashing of the corresponding parameter stops, the
refrigerator will save the set value of the parameter.
● Parameter function
°F: Fahrenheit temperature display
°C: Celsius temperature display
MAX: System powerful mode
ECO: System energy-saving mode
L 、M、H：Battery voltage protection level
Battery Protection
protection voltage at 12V
H 11.7±0.3V
M 10.7±0.3V
L 10.2±0.3V
Note: The voltage scale measures the voltage at the power input of
the compressor, not that at the battery output. The protection
voltage has a deviation of ± 0.3V for different external power
supplies.
● When the refrigerator is switched on, the compressor will start
only after 3-minute delay protection when the display temperature is
37.4°F greater than the set temperature.
● To ensure the performance of the compressor, the compressor
cannot be restarted until the stop time of the compressor exceeds
the protection delay time.
● Power-failure memory function: When the control board is
powered off, the system will remember the set temperature before
the disruption.
After the power supply is restored, the system will directly operate
at the setting before the disruption.
08
repeatedly and
Restore working Protection Restore working
voltage at 12V voltage at 24V voltage at 24V
12.7±0.3V 24.6±0.3V 26.0±0.3V
11.7±0.3V 22.6±0.3V 24.0±0.3V
11.2±0.3V 21.6±0.3V 23.0±0.3V
● Instruction for temperature setting function
— Double-box single-control series :
The temperature can be set for the small box. It is recommended to
adjust the temperature to between -4°F and 50°F. The temperature
cannot be set for the large box, but it will change according to the
set temperature of the small box. The temperature range in the box
is roughly between 23°F and 68°F.
09