Memorex MT1125A Manuel D'instruction page 11

All manuals and user guides at all-guides.com
TROUBLESHOOTING GUIDE
Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS POSSIBLE SOLUTIONS
• Make sure the power cord is plugged in.
TV does not
• Try another AC outlet.
operate
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.
• Station or CATV experiencing problems, tune
Poor sound
to another station.
or No sound
• Check sound adjustments (Volume and
Muting).
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune
to another station.
Poor picture
• Check antenna or CATV connections, reorient
or No picture
antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
• Station or CATV experiencing problems, tune
to another station.
Poor recep-
• Station signal is weak, reorient antenna to
tion on some
receive weaker station.
channels
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune
to another station.
• Make sure channels are set into memory.
Poor color or
• Check picture control adjustments.
no color
• Check antenna or CATV connections, reorient
antenna.
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune
Picture
to another station.
wobbles
• Make sure channels are set into memory.
or drifts
• CATV company is scrambling signal.
• Check antenna orientation.
SPECIFICATIONS
AC Power Input:
AC Power Consumption:
Chassis Construction:
Picture Tube: 25" (measured diagonally)
Audio Power Output Rating:
Speaker: 1-1/2" x 2-11/16" Full Range, 8 ohm x 2
Tuner Type: 181 Channel, Quartz PLL Frequency Synthesized
Remote Control: Infrared, Direct Access, 2 x AAA batteries
ACCESSORY:
Remote Control
3i01101A E
SYMPTOMS
No CATV
reception
Horizontal or
diagonal bars
on screen
No reception
above
channel 13
No Remote
operation
TV shuts off
Closed -
Caption is
not activated.
Display is not
shown in your
language.
120 V, 60 Hz Receiving Channels:
110W VHF
IC Solid state UHF
CATV
2.5 + 2.5 W
Antenna Input Impedance:
Dimensions:
Weight:
11
POSSIBLE SOLUTIONS
• Check all CATV connections.
• Set TV/CATV menu option to the CATV mode.
• Station or CATV system problems, try another
station.
• Check antenna connections, reorient antenna.
• Check for sources of possible interference.
• Make sure TV/CATV menu option is in the
appropriate mode.
• If using antenna, check UHF antenna
connections.
• Batteries are weak, dead or inserted
incorrectly.
• Remote is out of range, move closer to TV
within 15 feet.
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions between the
Remote and the TV.
• Make sure the power cord is plugged in.
• No broadcast on station tuned.
• Sleep Timer is set.
• Power interrupted.
• TV station experiencing problems or program
tuned is not closed captioned. Try another
channel.
• Check CATV connection or VHF/UHF
antenna, reposition or rotate antenna.
• Press TV/CAPTION/TEXT button to turn on
the closed caption decoder.
• Select proper language in the menu options.
01-97 (5A)-(A-3)
98-99 (A-2)-(A-1)
14-22 (A)-(I)
23-36 (J)-(W)
37-65 (AA)-(FFF)
66-125 (GGG)-(125)
75 ohm (VHF/UHF/CATV)
Coaxial Input
24-5/16" (W) x 20-11/16" (H) x 19-13/16" (D)
59.9 Ibs
28.09.99, 13:21
2-13
14-69
11