Chicago Pneumatic CP 0009 Instructions D'origine page 20

Safety and operating instructions
Place the rotation release shifter plunger (A) in
♦
the fronthead (B) before assembling the chuck
sleeve (C).
Be sure that the straight spline on the piston (D)
♦
engages the straight spline on the chuck sleeve
(C), and that the spiral spline on the piston (D)
engages the spiral spline of the ratchet ring (E).
Assembly the ratchet ring (E) in the fronthead (B),
♦
so that the flats of the ratchet teeth engage the
end of the pawls (F).
Tighten thru bolts evenly to prevent binding. After
♦
tightening, rotate the chuck manually to make
sure that the rotation is free.
20
All manuals and user guides at all-guides.com
www.CrowderSupply.com • Toll Free: 888-883-5144
Storage
> Clean the machine properly before storage, in
order to avoid hazardous substances. See "Dust
and fume hazard"
> Pour approximately 1 ⁄
2
the air inlet nipple, connect the machine to the
compressed air supply and start it for a few
seconds.
> Always store the machine in a dry place.
Disposal
A used machine must be treated and disposed of in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible, and
in respect to local restrictions.
9800 0547 90 | Original instructions
CP 0009, CP 0014
oz (5 cl) of oil directly into