Chicago Pneumatic CP 0009 Instructions D'origine page 18

Safety and operating instructions
Start and stop
CP 0014
Start the machine by squeezing the trigger while
firmly holding the handle.
CP 0014
Stop the machine by releasing the trigger. The
trigger returns automatically to the stop position.
Operating
Starting a cut
Stand in a stable position with your feet well away
♦
from the inserted tool.
Press the machine against the working surface
♦
before you start.
Start collaring at such a distance from the edge
♦
that the machine is capable of breaking the
material without levering.
Never try to break off too large pieces. Adjust the
♦
breaking distance (A) so that the inserted tool
does not get stuck.
18
All manuals and user guides at all-guides.com
www.CrowderSupply.com • Toll Free: 888-883-5144
CP 0009
CP 0009
Breaking and drilling
Use protective shoes, gloves, helmet, ear
♦
protectors, and impact resistant eye protection
with side protection.
Avoid working in extremely hard materials for
♦
example granite and reinforcing iron (re-bar)
which would cause substantial vibrations.
Check regularly that the machine is well
♦
lubricated.
♦ When the machine is lifted, the start and stop
device must not be activated.
Any form of idling, operating without insertion
♦
tool or operating with an uplifted machine must
be avoided.
Stand firmly and always hold the machine with
♦
both hands.
♦ Hold the inserted tool firmly against the work
surface before starting the machine.
Let the machine do the work; do not press too
♦
hard.
When taking a break
During all breaks you must place the machine in
♦
such a way that there is no risk for it to be
unintentionally started.
In the event of a longer break or when leaving the
♦
workplace: Switch off the power supply and then
bleed the machine by activating the start and stop
device.
Maintenance
Regular maintenance is a basic requirement for the
continued safe and efficient use of the machine.
Follow the maintenance instructions carefully.
9800 0547 90 | Original instructions
CP 0009, CP 0014