Basic Safety Instructions:
WARNING – Maintenance and repair work on pneumatic equipment.
Compressed air can cause severe injury. Observe legal regulations. Take
precautions for persons and environment.
Additionally, observe the following:
· Secure machine against unintentional starting and let the machine cool down to
the ambient temperature
· Use suitable transport equipment, hoists or lifting accessories for moving heavy
assembly groups or parts. Protection against tipping, tumbling or falling down when
assembling/ disassembling the machine/parts.
CAUTION – Skin exposure to hazardous dusts may cause severe dermatitis. Dust
present at the work place could be disturbed during the maintenance procedure and
inhaled. Clean machine and work place before maintenance work.
WARNING – Danger of explosion! Generation of sparks during maintenance work!
Observe local safety regulations. Avoid use of force when disassembling and
assembling the machine. Always do maintenance work outside areas which are not
exposed to explosion hazards.
PROHIBITION
Eating, drinking and smoking are forbidden during maintenance and repair work.
NOTICE – Only use original the manufacturer, in order to avoid damages. Check the
adherence to the technical specifications according to the operation manual after
each maintenance work. Only use genuine spare parts. Otherwise you risk a
decrease in machine performance and an increase in maintenance work.
IMPORTANT – There is no warranty for damages and liability is disclaimed, if non-original spare parts are
used.
Maintenance Instruction
Generally, pneumatic machines need little maintenance. If the following rules are observed,
the machine will have the expected long life-time and high reliability. Service life and
performance of the machines are decisively determined by:
· The air purity
· The lubrication conditions and maintenance
· The regular control of the compressed air filter, as well as the regular checking of the
machine with regards to external damages.
SERVICE AND MAINTENANCE
47