Ega Master AQUAMaster 79915 Manuel D'instructions page 35

These machines are designed for commercial/industrial use only.
Only trained, skilled personnel are allowed to operate the machine.
The drill serves for drilling:
- Wood, plastic, non-ferrous metal, cast iron, steel and stainless steel It can be applied for:
- Chemical industry / refineries, nuclear industry, body construction and ship building industry,
construction. The drill can be used for underwater work as well. The machine must be held
tight against rotation.
Any use deviating from the intended use as described is considered to be improper use.
- Working without personal protection equipment.
- Using the machine in an inadmissible area.
- Drilling self-flammable material.
1 Valve trigger
2 Motor housing
3 Hydraulic connection (P)
4 Hydraulic connection (T)
5 Gear housing
6 Adjusting sleeve
Sliding clutch for prevention of overload and accidents, gear capsuled in a dustproof way,
lubrication centralized and permanent, rotatable second handle with water cooling and drilling
depth gauge.
INTENDED USE
IMPROPER USE
PRODUCT DESCRIPTION
Fig. 1
7
8
9
10 Flush connection
11 Depth gauge
Sliding sleeve
Shank
Second Handle
35