JBL ON STAGE 400P Manuel De L'utilisateur page 7

UNPACKING YOUR JBL ON STAGE
Carefully unpack your speaker system and identify all its components: Carefully unpack your speaker system and identify all its components:
JBL On Stage ™* 400P
QUICK SETUP INSTRUCTIONS
•
Plug the barrel end of the power supply cord into the power jack and plug the other end into the wall. Plug the barrel end of the power supply cord into the power jack and plug the other end into the wall.
•
Next, push the power switch; a green LED will light up, indicating that the unit is powered. Next, push the power switch; a green LED will light up, indicating that the unit is powered.
•
Find the correct adapter for your iPod/iPhone, then fi rmly place it into the docking area shown. Find the correct adapter for your iPod
•
Next, place your iPod/iPhone into the dock, making sure your iPod Next, place your iPod
•
Adjust the volume, using (+) to increase and (–) to decrease. Press both to mute the JBL On Stage 400P unit. Adjust the volume, using (+) to increase and (–) to decrease. Press both to mute the JBL On Stage 400P unit.
Press either button to unmute. Press either button to unmute.
Power
Jack
Power
DC-In
Switch
Power
DC-In
Power
0067CSK - JBLOnStage400P UG ALL.indd 7
All manuals and user guides at all-guides.com
Adapters for IR remote
iPhone and iPod
, then fi rmly place it into the docking area shown.
into the dock, making sure your iPod/iPhone is fi rmly seated.
Auxiliary
Port
JBL
Audio-In
Audio-In
™* 400
JBL
MENU
Power supply Audio cable
is fi rmly seated.
P
WWW.JBL.COM 7 7
30/09/08 9:27