Publicité
Les langues disponibles
Les langues disponibles
Front USB 3.0 Connector: JUSB2
USB 3.0 port is backward-compatible with USB 2.0 devices. Supports data transfer rate
up to 5 Gbit/s (SuperSpeed).
USB 3.0 Bracket (optional)
Important
•
Note that the pins of VCC and GND must be connected correctly to avoid possible
damage.
•
If you want to use a USB 3.0 device, you must use the USB 3.0 cable to connect to
the USB 3.0 port.
•
For P67A-C43, P67S-C43 & P67A-S40 (support up to USB 2.0 speed only), please
insert a "USB 3.0 to USB 2.0" convertor into JUSB2 for connecting the USB 2.0
device.
Front Panel Audio Connector: JAUD1
This connector allows you to connect the front panel audio and is compliant with Intel
Front Panel I/O Connectivity Design Guide.
* The MB layout in this figure is for reference only.
®
En-19
Publicité
