BST UDR-103 BP Manuel D'utilisation page 11

UDR-103 BP
BELT TRANSMITTER
BELT TRABSMITTER DESCRIPTION
© Copyright LOTRONIC 2012
Master frequency list :
The Master of frequencies should be accessed only by experienced users in situations Which
cal1 for precise frequency selection. The " U " is a comprehensive index of all available
frequencies in 50 kHz increments.
To access the Master, in the group selection,push and hold up button to select group number,
until "U" is shown.
Select frequency in master list :
Press 2 X MENU button While only " U " is shown, the UP button scrolls up through al1
available frequencies;The down button scrolls down. Press and release to change the
frequency in 50 kHz increments; press and hold to scroll quickly.
When the correct frequency is displayed, wait five seconds for the screen to time out.
11) ANTENNA
12) DISPLAY
13) ON/OFF/MUTE BUTTON
Press and hold on to switch the belt transmitter on or off
Press and release to emable or disable mute function
14) SET BUTTON
Use to select frequency
15) BATTERIES COVER
16) IR SENSOR
17) GAIN CONTROL
18) MUTE LED
Red : Mute available
Light off : Mute disable
19) MIC INPUT
20) MIC SENSITIVITY SELECTOR
WWW.BSTDJ.COM
Page 11