Télécharger Imprimer la page

Olympia A 4040 Mode D'emploi page 12

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 19
All manuals and user guides at all-guides.com
Important Safety Information
Please observe the following information to ensure reliable operation of
the laminator:
1
Read this manual thoroughly and observe the instructions and
information in it when operating the unit.
Keep the operating instruction manual available for future
2
reference
.
Prevent damage to the power plug and power cable. Never
3
twist the power cable. Do not operate the unit if the power cable
or power plug is damaged.
Do not use the unit in the vicinity of hot surfaces or in damp
4
environments and protect it from direct sunlight and dusty
conditions.
Disconnect the power plug before starting to clean the unit.
5
Never use any solvents or aggressive cleaning agents.
Metallic objects cannot be laminated.
6
7
Children must not be allowed in the vicinity of the equipment
when it is ready to operate.
8
Disconnect the power plug when the unit is not in use.
Always switch the unit off immediately if it emits a strong smell
9
or it is not in operation.
Do not touch the power plug with moist hands.
10
Ensure that the On/Off switch is in the "OFF" position before
11
connecting the laminator to the mains power supply.
Only insert recommended foil pockets, as specified in the
12
Section "Features", in the unit. Using foil pockets which are too
large could lead to the unit jamming.
Do not laminate heat-sensitive materials, such as thermal
13
paper, in the unit.
14
Lamination of moist documents produces poor results.
Do not use foil pockets, intended for cold lamination, for hot
15
lamination. This could damage the machine, foil pockets and
document.
16
Do not cut foil pockets to size. The resulting cut edges could
cause the foil pockets to jam.
17
Keep loose clothing, ties, jewellery, long hair and other loose
objects away from the infeed opening. Risk of injury!
The socket and the mains connection of the device must be freely
18
accessible for safety reasons so that the power supply can be
disconnected in emergencies.
The device may only be used indoors in dry rooms.
19
12

Publicité

loading